Advertisement
ATTACHMENT OF THE FALL ARRESTER TO THE
TENSIONED ROPE
B Hold the unit in your hand so that the arrow
points upwards (if in the wrong position, the
dropping latch covers the insert slit for the
rope)
C Open pawl 1 by lifting the energy absorber
belt.
D Press the pushbuttons of the rope prism
(unit lock) with your thumb and middle
finger: the prism opens itself.
• Press both buttons, pressing the upper
button first
• A slight twisting movement helps the unit
to open
This procedure can be carried out with just
one hand! It is designed for both left-handed
and right-handed operation!
E Place the fall arrester onto the guide rope.
CAUTION:
Check that the unit sits correctly on the rope!
• Prism is closed (basic setting)
• Unit runs freely during manual lifting and
lowering.
• Unit blocks when jerked downwards.
SSE 02 IN USE
B
C
E
D
EN
Advertisement
