Table of Contents
Advertisement
A PPROVAL
.
Complies with the EC Directive 89/686/EEC.
Type testing and production monitoring by:
TÜV Süd, Product Service GmbH
Daimlerstr. 11, 85748 Garching
CE 0123
Quality management system certified to
DIN EN ISO 9001.
Production monitoring by notified office in
accordance with Category III
REGULAR INSPECTIONS
• This personal protective equipment must be
inspected at least once a year by an expert.
The result must be documented in the test
card at the end of this user manual.
SALES
• The dealer must ensure that the user manual
is supplied in the language of the designated
country. The respective translation must be
authorised by BORNACK.
SERVICE
If you have any further questions about safe
use of this PPE or other BORNACK services, such
as:
• Risk analysis
• Rescue plans
• Training courses
• Expert inspections
OTHER
please send your question to our e-mail hotline:
hotline@bornack.de
We will be happy to help!
MAINTENANCE
• Oil mobile parts on karabiners and other
devices to ensure they run smoothly.
• Maintenance work may only be carried out by
trained experts. The instructions in this user
manual must be observed strictly.
• Protective equipment that is well looked
after will last longer!
CLEANING
• Dry damp personal protective equipment in
the air, not on artificial heat sources. Dry
metal components with cloths.
• Clean soiled textile components (e.g. arrester
harnesses and ropes) with lukewarm water
and a little detergent for delicates. Then rinse
thoroughly and allow them to dry in the air.
No other cleaning agents may be used!
• For information about disinfection, please
contact the email hotline: hotline@bornack.de
• If the personal protective equipment comes
into contact with saltwater, keep it wet until it
can be rinsed with distilled water.
• Use compressed air to blow on the unit.
8 | 9
Advertisement
Table of Contents
