Philips Avent SCH540 Manual page 13

4 Sterilise or boil the soother and protection cap (not the measurement
unit!).
The soother and protection cap are suitable for all forms of sterilisation.
Sterilise using a Philips AVENT Steam Steriliser or boil in water for 5 minutes.
If you use a sterilising solution, follow the instructions on the package. Do not leave
the soother in the sterilising solution for longer than recommended, as this may
weaken the teat.
Wash your hands thoroughly and ensure surfaces are clean before contact
with sterilised components.
5 After sterilisation, let the soother cool down for 5 minutes and squeeze out
any trapped water from the teat. This is to ensure hygiene.
to reassemble the soother thermometer:
1 Align the blocks of the measurement unit with the matching slots in the
back of the shield.
2 Insert the measurement unit into the shield. Make sure that the tip of the
probe goes into the pocket inside the teat. (Fig. 3)
3 Turn the measurement unit 90° clockwise to lock it into position.
Cleaning the flexible-tip thermometer
Do not sterilise or boil the thermometer.
Do not clean the flexible-tip thermometer in the dishwasher, in the microwave
or in a microwave steriliser.
1 Clean the flexible-tip thermometer with a soft damp cloth.
Cleaning the regular soother
Before first use, wash and rinse the soother thoroughly.
Clean the soother before each use.
1 Sterilise or boil the soother.
The soother and protection cap are suitable for all forms of sterilisation.
Sterilise using a Philips AVENT Steam Steriliser or boil in water for 5 minutes.
If you use a sterilising solution, follow the instructions on the package. Do not leave
the soother in the sterilising solution for longer than recommended, as this may
weaken the teat.
Wash your hands thoroughly and ensure surfaces are clean before contact
with sterilised components.
EngliSH
13