Technical Specification - TMC Aquarium REEF EASI-Dose Plus Series Instructions For Installation And Use Manual

PARTS LIST
1. LCD display
2. Dosing pump head
3. Silicone hosing (3m)
4. Inlet (left)
5. Outlet (right)
6. Non return valve
7. Hosing connector
8. Power supply unit
(PSU)
PARTS REQUIRED FOR INSTALLATION AND OPERATION (NOT
SUPPLIED)
• Residual current device (RCD) with a rated residual operating current not exceeding 30mA.
• Additional silicone hosing and hosing connectors (depending on individual installation
requirements).
• Scissors for cutting the silicone hosing to the required length.
• Measuring vessel suitable for accurately measuring 10ml.

TECHNICAL SPECIFICATION

Power Consumption: 4W
Max Flow: 60ml/minute
Motor Speed: 3800rpm
Accuracy: +/-5%
2
9. Slave connection cable (supplied with Slave only)
10. PSU port -12v (not supplied with Slave)
11. Extension port A for Slave unit
12. Extension port B for Slave unit
13. Easi-Stir Plus extension port
14. Input from master (using connection cable
supplied with Slave)