HoMedics THERA-P BPW-200 Manual page 12

1. Press the User Select Button to
choose User 1 or User 2.
START
After the user number is selected, press
STOP
the START/STOP button to confirm the
chosen user.
2. With the cuff wrapped around your
wrist, press the START/STOP button.
Do not inflate the cuff unless it is
wrapped around your wrist. All digits
will light up, checking the display
functions. The checking procedure will
be completed after about 2 seconds.
START
STOP
OR
21
3. After all symbols disappear, the display
will show a blinking "0". The monitor
is "Ready to Measure" and will
automatically inflate the cuff to begin
measurement. The cuff will then begin
deflating as measurement continues.
Note: The monitor will re-inflate
automatically if the system detects
that your body requires more
pressure for measurement.
22