Table of Contents
Advertisement
The SlideWriter
Beeper
I "
The SlideWriter contains a beeper that alerts the operator to various
conditions with different kinds of beeps. The following is a list of the
type (solid or warbled) and length of beeps, and why they occur:
• A solid one-half second beep indicates the completion of a
hardware reset and power-up ready.
• A solid one-half second beep indicates an increase in function
selection.
• Four short beeps indicate that the SlideWriter has successfully
recorded an image.
• A continuous repeating beep approximately once per second, the
Current Exposure display flashing once per second, and a rod LED
on the camera indicate that the SlideWriter is out of film. Refer to
page 19 of this manual to unload the film.
» A warbled beep for two seconds indicates an error. The beeper
will emit a warbled sound approximately every fifteen seconds. The
alarm will stop when the RESET Switch is pressed or send a
REQUEST SENSE command from the initiator or host.
31
Advertisement
Table of Contents
