Table of Contents
Advertisement
1 - Load Film
2 - Unload Film
28
Function
Function Description
Numbers
1
Load film
Unload film
2
Disable automatic calibration
3
Calibrate to assigned intensities
4
Set SCSI addresses
5
Test pattern 0, no exposure
6
Test pattern 1 , no exposure
7
8
Test pattern 0 with exposure
Test pattern 1 with exposure
9
Set frame counter
10
11
Enable automatic calibration
Table 5-1. Numbered SlideWriter functions
Choose the function number that corresponds to the function
desired.
The SlideWriter can perform the following functions:
Select this function after loading film into the camera. It causes the
SlideWriter to;
• Clear the "end-of-film" and "no film" flags;
• Set the "film present" flag;
• Move the film ahead to the first frame, and
• Set the frame counter to one.
This function causes the SlideWriter to ;
• Reset the end-of-film condition;
• Reset the "film present" flag;
• Set the frame counter to zero. (The Display Window
will show two dashes.)
|
Advertisement
Table of Contents
