Echo WT160S Owner's Manual
Wheeled trimmer
Hide thumbs
Also See for WT160S:
- Parts manual (24 pages) ,
- Specification sheet (1 page) ,
- Specification sheet (1 page)
Table of Contents
Related Manuals for Echo WT160S
Summary of Contents for Echo WT160S
- Page 1 WT160S 160 cc SELF-PROPELLED WT160T 160 cc PuSh W/TILT WT190 190 cc PuSh WT190S 190 cc SELF-PROPELLED WT190T 190 cc PuSh W/TILT WT190SE 190 cc SELF-PROPELLED ELECTRIC PN: 12331 Rev. 050809 Companion to 12330 SN Range: 702557 - A05369...
- Page 2 If you have any questions or comments about this manual, please call us toll-free at 1-800-247-7335. If you have any questions or problems with your machine, please call or write your local authorized EChO Bear Cat Dealer. This document is based on information available at the time of its publication. EChO Bear Cat is continually making improvements and developing new equipment.
- Page 3 LImITEd WaRRaNTY This warranty applies to all Ag and Outdoor Power Equipment manufactured by Crary Industries. Crary Industries warrants to the original owner each new Crary Industries product to be free from defects in material and workmanship, under normal use and service. The warranty shall extend 1 year from date of delivery for income producing (commercial) applications and 2 years from date of delivery for non-income producing (consumer) use of the product.
-
Page 4: Table Of Contents
TABLE OF CONTENTS dEScRIpTIoN paGE SaFETY ........................ 1 1.1 SAFETy ALERT SyMBOL ..................1 1.2 EMISSION INFORMATION ...................1 1.3 BEFORE OPERATINg ..................1 1.4 OPERATION SAFETy ..................2 1.5 MAINTENANCE AND STORAgE SAFETy ............2 1.6 BATTERy SAFETy ....................2 1.7 SAFETy DECAL LOCATIONS ................3 aSSEmbLY ...................... -
Page 5: Safety
SaFETY Section The engine on your power equipment, like most outdoor 1.1 SaFETY aLERT SYmboL power equipment, is an internal combustion engine that burns gasoline or diesel fuel (hydrocarbons). Therefore, your power equipment must be equipped with a spark arrester muffler in continuous effective working order. The spark arrester must be attached to the engine exhaust system in such a manner that flames or heat from the system will not ignite flammable material. -
Page 6: Operation Safety
SAFETY Do not operate this equipment in the vicinity of 1.5 maINTENaNcE aNd SToRaGE SaFETY bystanders. Keep the area of operation clear of all Before inspecting, servicing, storing, or changing persons, particularly small children. It is recommended an accessory, shut off the machine and make sure that bystanders keep at least 50 feet (15 meters) away all moving parts have come to a complete stop. -
Page 7: Safety Decal Locations
SAFETY 1.7 SaFETY dEcaL LocaTIoNS Familiarize yourself with all of the safety and operational decals on the machine and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety instructions and decals. Make certain that all safety and operating decals on this machine are kept clean and in good condition. -
Page 8: Assembly
aSSEmbLY Section 2.1 INSTaLL THE HaNdLEbaR Remove the trimmer and handlebar from the shipping box and pallet. The manual container is partially assembled on one side of the handlebar. If necessary, loosen the bolt securing the manual container to the handlebar. Rotate the container and attach the remaining end to the opposite side of the handlebar using one 5/16"... -
Page 9: Add Oil
ASSEMBLY Adjust the handlebar height by rotating the handlebar until the top hole on the handlebar is aligned with a corresponding hole on the handlebar support channel and attach using two 5/16" x 1" bolts, washers and nuts. DO NOT TIghTEN BOLTS AT ThIS TIME. -
Page 10: Features & Controls
FEaTuRES & coNTRoLS Section The following descriptions define the features and controls SELF-pRopELLEd baIL of your machine. MODELS: ALL SELF-PROPELLED MODELS Engages the self-propel mode. Pull up the self-propel Refer to Figure 3.1 for feature locations. bail located under the handlebar to start the self-propel REFER TO ENgINE OWNERS MANuAL FOR FuRThER mode. -
Page 11: Operation
opERaTIoN Section As with any other piece of outdoor power equipment, 4.2 SToppING THE moWER getting the feel for how your machine operates and getting to know the best techniques for particular jobs are Move the throttle (if equipped) to the SLOW position, important to overall good performance. -
Page 12: Self-Propelled Operation
OPERATION 4.6 paRaLLEL TRImmING FoR SELF- 4.4 SELF-pRopELLEd opERaTIoN pRopELLEd modELS Models: All self-propelled models The Wheeled Trimmer can be adjusted to mow at an angle. The Wheeled Trimmer can be used in either push or self- This allows the machine to trim in hard to reach places. propelled mode. -
Page 13: Service & Maintenance
SERvIcE & maINTENaNcE Section 5.1 maINTENaNcE ScHEduLE The items listed in this service and maintenance schedule are to be checked, and if necessary, corrective action taken. This schedule is designed for units operating under normal conditions. If the unit is operating in adverse or severe conditions, it may be necessary for the items to be checked and serviced more frequently. -
Page 14: Cutting String Replacement
SERVICE & MAINTENANCE WaRNING BEFORE INSPECTINg OR SERvICINg ANy PART OF ThIS MAChINE, ShuT OFF POWER SOuRCE, DISCONNECT SPARK PLug WIRE FROM SPARK PLug AND MAKE SuRE ALL MOvINg PARTS hAvE COME TO A COMPLETE STOP. 5.3 cuTTING STRING REpLacEmENT Cutting string is available in two thicknesses, 130 mil (standard) and 155 mil (heavy duty). -
Page 15: Troubleshooting
TRoubLESHooTING Section Before performing any of the corrections in this troubleshooting chart, refer to the appropriate information contained in this manual for the correct safety precautions and operating or maintenance procedures. Contact your dealer or the factory for service problems with the machine. pRobLEm poSSIbLE cauSE REmEdY... -
Page 16: Specifications
SpEcIFIcaTIoNS Section 7.1 SIzE SpEcIFIcaTIoNS modEL WT190SE WT160S WT160T WT190 WT190S WT190T B & S B & S B & S B & S ENGINE honda OhC honda OhC Quantam Quantum Quantum Quantum ENGINE 190cc 160cc 160cc 190cc 190cc 190cc... -
Page 17: Bolt Torque
SPECIFICATIONS 7.2 boLT ToRQuE The tables below are for reference purposes only and their use by anyone is entirely voluntary, unless otherwise noted. Reliance on their content for any purpose is at the sole risk of that person and any loss or damage resulting from the use of this information is the responsibility of that person. - Page 18 -Conformity Assessment Procedure: Annex V (Use of harmonized standard EN ISO 3744:2010) Sound Power Level: 84 dB L Guaranteed Sound Power Level: 98 dB L WT160S Serial number 703605 and up West Fargo, ND 58078-0849 June 29, 2011 CRARY INDUSTRIES, INC.
- Page 19 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: ECHO Type: Engine driven Walk Behind Trimmer Model Numbers: WT160SXE Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 20 Declaration of Conformity The undersigned manufacturer: Crary Industries, Inc. 237 NW 12 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: Crary Bear Cat Type: Engine driven Walk Behind Trimmer Model Numbers: WT160SXS Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 21 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: ECHO Bear Cat Type: Engine driven Walk Behind Trimmer Model Numbers: WT160T Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 22 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: ECHO Type: Engine driven Walk Behind Trimmer Model Numbers: WT160TXE Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 23 Declaration of Conformity The undersigned manufacturer: Crary Industries, Inc. 237 NW 12 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: Crary Bear Cat Type: Engine driven Walk Behind Trimmer Model Numbers: WT160TXS Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 24 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: ECHO Bear Cat Type: Engine driven Walk Behind Trimmer Model Numbers: WT190 Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 25 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: ECHO Type: Engine driven Walk Behind Trimmer Model Numbers: WT190XE Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 26 Declaration of Conformity The undersigned manufacturer: Crary Industries, Inc. 237 NW 12 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: Crary Bear Cat Type: Engine driven Walk Behind Trimmer Model Numbers: WT190XS Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 27 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: ECHO Bear Cat Type: Engine driven Walk Behind Trimmer Model Numbers: WT190S Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 28 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: ECHO Type: Engine driven Walk Behind Trimmer Model Numbers: WT190SXE Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 29 Declaration of Conformity The undersigned manufacturer: Crary Industries, Inc. 237 NW 12 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: Crary Bear Cat Type: Engine driven Walk Behind Trimmer Model Numbers: WT190SXS Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 30 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: ECHO Bear Cat Type: Engine driven Walk Behind Trimmer Model Numbers: WT190T Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 31 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: ECHO Type: Engine driven Walk Behind Trimmer Model Numbers: WT190TXE Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
- Page 32 Declaration of Conformity The undersigned manufacturer: Crary Industries, Inc. 237 NW 12 Street P.O. Box 849 West Fargo, ND 58078-0849 Declares that hereunder specified: WALK BEHIND TRIMMER Brand: Crary Bear Cat Type: Engine driven Walk Behind Trimmer Model Numbers: WT190TXS Complies with the requirements of: Machinery Directive 2006/42/EC Emission of Gaseous and Particulate Pollutants Directive 2002/88/EC...
Need help?
Do you have a question about the WT160S and is the answer not in the manual?
Questions and answers
how do you change oil on a wt 190