Star StarJet SJ-48 User Manual page 56

Set line spacing to n/180 inch or n/216 inch
I
Both ] <ESC> "3"
n
27 51
n IB 33 n
Sets the distance the paper advances in subsequent line feedstorz/180inchorn/216
inch, where n is between Oand 255. If n =O,in Standard mode the line-feed distance
is set to O,but in IBM mode this command is ignored.
Set line spacing to n/60 inch or n/72 inch
I
I Both ] <ESC> "A" n
I
27 65
n I
IB
41 n
I
In Standard mode, sets the distance the paper advances in subsequent line feeds to
n/60 inch, where n is between Oand 255. If n = O,the line spacing is set to O.
In IBM mode this command defines the distance the paper advances in subsequent
line feeds to n/72 inch, where n is between 1and 85. The new line spacing does not
take effect until next <ESC> "2" command.
Execute <ESC> "A"
IBM <ESC> "2" 27 50
IB 32
Sets the line spacing to the value defined by the last preceding <ESC> "A"
command. Sets the line spacing to 1/6 inch if there is no preceding <ESC> "A"
command.
Line feed
I
Both <LF> 10 OA
Prints the current line and feeds the paper to the next line. See the preceding
commands for the line spacing.
Perform one n/180-inch or n/216-inch line feed
]
I
n
27 74
n IB 4A n
Feeds the paper once by n/180 inches or n/216 inches, where n is between 1 and
255. Does not move the print position right or left in the standard mode. Does not
change the line-spacing setting.
50