Machine Adjustments - Pro Mach Wexxar BEL Series Operation & Service Manual

B E L 2 5 2 F u l l y A u t o m a t i c U n i f o r m C a s e T a p e S e a l e r

Machine Adjustments

Safety: Disconnect machine electrics and compressed air before making any machine
adjustments.
On/Off Switch
Snap Folder WIDTH
ADJUSTMENT
DIMENSION 'D'
Snap Folders
[TOP FLAP
FOLDERS]
CONVEYOR CASE
WIDTH ADJUSTMENT
DIMENSION 'D'
There are three main adjustments required in setting up the BEL 252 to run a particular case size:
1. Case height 'E' - made with top hand wheel to move the machine head assembly up and down to the
height of the box.
2. Snap Folder case width adjustment 'D'- made by loosening the locking handles above each folder
unit and pulling or pushing a folder from the side of the machine. A self-centering mechanism moves
both folders together.
3. Conveyor case width adjustment 'D'- made with side hand crank to move side belt conveyors in
and out to fit the width of the box.
65-06-11 5/18/2007
E
D D
120-093
6
CASE HEIGHT ADJUSTMENT
DIMENSION 'E'
Top Tape Head
UNI-Drive side belt
Conveyor
Compressed air supply [LH rear
corner]
Bottom Tape Head