Table of Contents
Advertisement
8.6.11 Set Time/Date
The Set Time/Date window will display the current time and date for the system.
The window will allow the operator to exit the window or enter a new time and/or
date by selecting to the appropriate prompt.
8.6.12 Analog Scaling
The Analog Scaling window will display all the analogs used in the system. The
operator will be allowed to choose an analog or exit the window. After selecting
an analog, the operator can change the maximum and minimum scaling values
using the keypad. The Analog Scaling window will display the analog number,
analog label, device type (milliamps or volts), minimum analog value, and
maximum analog value for each analog point. This window will allow the
operator to exit the window or enter a new analog range minimum and/or analog
range maximum for one or more analog points. To change the analog scaling
values, select the input of your choice by touching the screen. Select either the
minimum or maximum. Use the keypad to type in a numeric value. Press
to accept the changes. Press the
MNL000463.doc
OK
© Versum Materials, Inc. as of the revision and date shown. All rights reserved.
Confidential and Proprietary Data
pushbutton to exit the window.
Revision 00
09/19/2016
Apply
Page - 44
Advertisement
Table of Contents
