Advertisement
English
Use
Before first use, operate the coffee maker with clean water 2 or 3 times, then switch off the
appliance and let it cool down for 5 minutes. Then repeat the process with fresh water. Your
coffee maker is now ready for use.
Fill the carafe (7) with cold fresh water, then lift the lid (4) and add the required amount to the
water tank (3). The quantity of water added can be measured from the scale in number of
cups on the water level indicator. Once the water has been added, place the carafe onto the
heating plate (10). Place the permanent filter (9) to the filter carrier (6). Add the required
amount of ground coffee to the filter and close the lid.
Place the appliance on a clean, flat work surface & connect it to a suitable electrical supply.
Press the power switch (1) to the on position. The switch (8) will light up, and after a few
moments, coffee will begin to pour into the carafe (7). Once the flow of coffee stops, the
coffee can be served. Removing the carafe from the heating plate will close a valve,
preventing leaks onto the heating plate.
Note: The carafe should not be removed while coffee is flowing into the carafe. Any coffee
remaining in the carafe can be kept warm by returning the carafe to the heating plate (10).
Note: The coffee maker should be allowed to cool before re-filling with cold water. Disconnect
the product from the mains supply & clean it after use.
Maintenance
Your Black & Decker tool has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon proper tool care
and regular cleaning.
Warning! Before performing any maintenance or cleaning of the tool, disconnect the
appliance from the power supply. Ventilation slots should be cleaned occasionally with a
clean, dry paint brush.
Cleaning
The main body of the appliance should be cleaned with a clean damp cloth only. The carafe,
carafe lid, filter & filter carrier can be washed in warm soapy water. Rinse with clean water and
dry thoroughly with a dry soft cloth.
Note: Do not use abrasives or chemical cleaners on any part of this appliance.
Note: All parts must be thoroughly dried before use.
The coffee maker should be de-scaled regularly. To de-scale, operate as normal, but add
25ml white vinegar to the carafe. After the water / vinegar mix has passed though the
appliance it can be disposed of.
Add a carafe of clean water to the water tank & operate the appliance as previously. This
should be repeated 2 more times before the product is used again.
-6-
Advertisement
