Star Micronics NX-2400 User Manual page 74

Increase character spacing
Mode ASCII
Decimal Hexadecimal
Std.
<ESC> "" n
27 32 n IB 20 n
Increases the space between characters by n dots, where n is a number
from 0 to 127. Used in microjustification.
Select double or quadruple size
Mode ASCII
Decimal
Hexadecimal
Both <ESC> "h" n
27 104 n 1B 68 n
Selects
the size of subsequent characters as shown below. Extra-high
characters align along the cap-line of normal characters, with the base
line temporarily moving down. Line spacing is temporarily doubled when
n = 1 and quadrupled when n = 2.
n Effect
0 Normal size
1 Double-high, double-wide
2 Quadruple-high, quadruple-wide
Print double-height characters
Mode ASCII
Decimal Hexadecimal
<ESC' "W" " 1" 27 119 49 1B 77 31
Both
<ESC> "W" <I>
27 119 1 1B 77 01
1 r- < FS > "V" "1"
1 28 86 49 IlC 56 31 I
OLU.
<FS> "V" <I> 1 28 86 1 1C 56 01 1
Prints subsequent characters at double height without moving the base
line, and without changing the line spacing.
Return to normal height
Mode 1 ASCII
Decimal
Hexadecimal
<ESC> "W" "0"
27 119 48 1B 77 30
Both
<ESC> "W" co> 27 119 0 1B 77 00
<FS> "V" "0" 28 86 48 1C 56 30
Std.
<FS> "V" co> 28 86 0 1C 56 00
Terminates double-height printing and prints subsequent characters at
normal height.
66