Star Micronics NX-2400 User Manual page 70

n Character set n Character set
0 U.S.A
1 France
2 Germany
3 England
4 Denmark I
5 Sweden
6 Italy
7 Spain I
8 Japan
9 Norway
10 Denmark II
11 Spain II
12 Latin America
13 Denmark/Norway
The first eight of these character sets (from U.S.A. to Spain I) can be
selected as power-up defaults by DIP switches 2-2 to 2-4.
Enable printing of all character codes
Mode ASCII
Decimal Hexadecimal
IBM < ESC > "\"
nl n2
27 92
nl n2
1B SC
nl n2
Enables printing of all characters in the IBM character set, including those
assigned to character codes which are normally considered control codes.
This command remains in effect for the next nl + n2 x 256 characters,
where nl and n2 are numbers between 0 and 255. During this interval
no control functions are executed. If a code with no assigned character
is received, the printer prints a space.
Enable printing of a// character codes on next character
Mode ASCII
Decimal Hexadecimal
IBM I
cEfjC> 'cn'r
27 94 IlB 5E
This command operates like < ESC > "\" except that it remains in effect
for only one character.
Select s/ash zero
Mode ASCII Decimal Hexadecimal
'ESC' " 7. L " 1"
27 126 49 1B 7E 31
Both
<ESC> " 1, _ <I> 27 126 1 1B 7E 01
Causes subsequent zero characters to be overprinted with a slash.
Select normal zero
Mode
ASCII
Decimal Hexadecimal
<ESC>
" - >1
"0" 27 126 48 1B 7E 3b
Both
<ESC>
"_*' <o>
27 126 0 1B 7E 00
Causes subsequent zero characters to be printed normally (0), without
a slash.
62