Prowax Minifit Filter; Change Volume On The Transmitter - oticon CROS Instructions For Use Manual

ProWax miniFit filter

The dummy speaker has a white wax filter
attached to the end with the earpiece. The
wax filter keeps wax and debris out of the
dummy speaker. It has no acoustic purpose.
Replace the filter for hygienic reasons
when clogged.
Remove the earpiece from the dummy
speaker before replacing the wax filter.
IMPORTANT NOTICE
Always use the same type of wax filter as was originally supplied with the
transmitter. If you are in any doubt about the use or replacement of wax
filters, contact your hearing care professional.
22 About Start-up Handling Warnings More info

Change volume on the transmitter

The push button on the transmitter allows you to adjust the volume of
the transmitted sound. You will hear a high pitch beep in the hearing aid
when you increase or decrease the volume.
Wax filter
MAXIMUM
START-UP VOLUME
Press button to
increase volume
Press button to
decrease volume
MINIMUM
Continues on next page
23