Put On The Transmitter; Caring For The Transmitter - oticon CROS Instructions For Use Manual

Put on the transmitter

Step 1 Step 2
Place the transmitter Hold the bend of the
behind your ear. dummy speaker wire
between your thumb
and index finger. The
earpiece should point
towards opening of
the ear canal.
18 About Start-up Handling Warnings More info
Step 3
Ear grip
(optional)
Gently push the
earpiece into your ear
canal until the dummy
speaker wire sits close
to your head. If the
dummy speaker has an
ear grip, place it in the
ear so it follows the
contour of the ear.

Caring for the transmitter

When handling your transmitter, hold it over a soft
surface to avoid damage if you drop it.
Clean the microphone openings
Use the brush of the MultiTool to
carefully brush debris away from the
openings. Carefully brush the surface
around the openings.
Make sure that no parts of the
MultiTool are squeezed into the
microphone openings by force. This
may damage the transmitter.
IMPORTANT NOTICE
Use a soft, dry cloth to clean the transmitter. The transmitter must never be
washed or immersed in water or other liquids.
Microphone
openings
19