Omron E5EZ-PRR Series Manual page 14

■ Parameters
Parameters related to setting items for each level are marked in boxes in the following flowchart and brief descriptions are given as required.
After finishing each setting, press the mode key to return to the beginning of each level.
Starting in manual mode
Press A key for at least 1 s.
c a-m
Press the
for at least 1 s;
display will flash.
Manual
Press the
See
for at least 3 s while
Mode
note 2. a-m is displayed.
Manual
Control Level
Note 1: When returning from the initial setting lever to the operation level, the
operation level's initial value will be displayed.
2: When returning from the protect level to the operation level, the oper-
ation level's initial value will be displayed.
Display
c
25
100
Press the
for at least 1 s
Advanced function
setting level
42
Digital Position-Proportional Controllers
Power ON
Starting in automatic mode
Operation Level
Press
for at least 1 s.
Press the
L
key
L
key for
at least 1 s.
L
key
See note 1.
Initial Setting Level
L
Press key
for at least 1 s.
Advanced Function
Setting Level
No. 1 Display
0
No. 2 Display
0
No. 3 Display
key
Initial setting level
Note: to select the advanced function
setting level, you must input the
password (-169) in the initial
setting level.
Adjustment Level
Press the
L
key
L + M
keys
L
Press the key for at least 1 s.
for at least 1 s;
c
25
display will flash.
100
L
Press the key for
100.0
at least 3 s.
Control stops.
Communications
Setting Level
L
Press key
for at least 1 s.
Input password.
Set value −169
Power ON
Press the key
for at least 1 s
Operation level
Press the key
for at least 3 s
E5EZ-PRR
L M
key:
+
PV display flashes
c
25
100
100.0
∗
L M
+ key
for at least 3 s
See note 2.
Protect Level
∗ The amount of time that a key must
be pressed can be changed under
protect level switching time
(advanced function setting level).
Control in progress
Control stopped
Not displayed for some models
Level change
Press the key
for less than 1 s
Adjustment level
Press the key
for less than 1 s