Star Micronics Delta User Manual page 15

_~
.-
-
_. .~
*_.
..-
i_-
i_-
h...
.
II-
--.
.-
. -.
I-
Cover ,
Control panel - on top right corner. These three buttons and
four "status" lamps are your day-to-day operational controls.
Here's what they do:
Power lamp - glows green when the power is on.
Ready lamp - glows green when the printer is ready to
accept data. This light flickers during transmission. Don't worry
about the flicker; it's normal!
On Line lamp - glows green when data transmission is pos-
sible.
Paper Out lamp - glows red when printer is out of paper and
stops printing.
On Line button - lets you change the "mode" from on-line to
off-line. When it's on-line, the printer can receive data from the
computer. When it's off-line, you can advance the paper with the
form feed and line feed buttons.
F.F. button - stands for "Form Feed." When you're off-line
you can tap this button and advance the paper to the top of a new
page or "form."
Platen knob
[ml
Power switch
Control panel
'igure 1-2. All of Delta's controls are on the right side.