Connect, Share & Sync; Connect With Wi-Fi; Connect With Bluetooth Wireless - Motorola Motoe6 User Manual

Connect, share & sync
Connect accessories, computers, networks, and more.

Connect with Wi-Fi

Turn Wi-Fi power on/off
Find it: Swipe up Settings > Network & internet, then tap the switch to turn it
>
on
When Wi-Fi is on, your phone automatically reconnects to available networks it has
used before.
Note: You can also turn Wi-Fi on and off in
Connect to networks
To find networks in your range:
1 Swipe up > Settings > Network & internet > Wi-Fi.
2 With Wi-Fi turned on, tap a found network to connect to it. When connected, you'll
see in the status bar.
Note: If you see a question mark in the Wi-Fi status indicator
down, tap the network, and enter the network's password.
Wi-Fi hotspot
Your can make your phone a Wi-Fi hotspot to provide portable, convenient Internet
access to other Wi-Fi enabled devices. Your phone turns off Wi-Fi and uses the mobile
network for Internet access. This feature may require an additional subscription service
from your service provider.
Find it: Swipe up > Settings > Network & internet > Hotspot & tethering > Wi-Fi
hotspot
Note: These steps may vary depending on your network.
To set up security:
• Hotspot name: Enter a unique name for your hotspot.
• Hide my device: Hide your hotspot from other devices.
Quick settings.
, swipe the status bar
• Security: Select the type of security you want: None or WPA2 PSK. For WPA2
PSK, enter a unique password (8 characters) that others will need to access your
Wi-Fi hotspot.
Note: To protect your phone and hotspot from unauthorized access, tap Advanced
to set up hotspot security (WPA2 is the most secure), including a password.
Wi-Fi modes
Your phone supports the following Wi-Fi modes: 802.11 a, b, g, n.

Connect with Bluetooth wireless

Turn Bluetooth power on
To turn Bluetooth on, swipe the status bar down and touch
open Bluetooth settings.
Note: Your phone automatically turns on Bluetooth power when you connect to a
paired device.
Tip: To extend battery life or stop connections, turn Bluetooth off when you're not using
it.
Connect devices
The first time you connect a Bluetooth device, follow these steps:
1 Make sure the device you are pairing with is in discoverable mode (for details, refer to
the guide that came with the device).
2 Swipe up > Settings > Connected devices > Pair new device.
3 With Bluetooth turned on, tap a found device to connect it (if necessary, tap PAIR or
enter a passkey like 0000). You can tap
the device will be used for.
When the device connects, the Bluetooth connected indicator
of the screen.
To automatically disconnect or reconnect a device, just turn the device off or on.
Note: Using a mobile device or accessory while driving may cause distraction and may
be illegal. Always obey the laws and drive safely.
Connect, share & sync
. Press and hold it to
to rename the device and choose what
appears at the top