Scan Tool Setup - Actron Professional Enhanced Scan Tool 9640A User Manual

Using The Scan Tool

Scan Tool Setup

Tool Setup allows you to change the
measurement units and LCD contrast,
turn beeper On/Off and display tool
information. The settings remain until
the internal batteries become dis-
charged.
Measurement Units
To change the measurement units, use
the
U P / D O W N
English/Metric and press
In the Measurement Units menu,
select English or Metric and then press
E N T E R
Press
E N T E R
3
Changing Display Contrast
The display contrast can be adjusted
from the Tool Setup menu. Select Dis-
play Contrast and press
Use the
increase and decrease the contrast.
Press
E N T E R
return to the Setup Tool menu.
Beeper
Beeper selection allows the user to turn Off the tool's beeper. The bell symbol
will not appear in the lower right hand corner of the display when the beeper
is off.
Tool Information
This function allows you to view specific
tool information that may be needed when
contacting customer service.
Select Tool Information with the
U P / D O W N
The information shown to the right displays
on the screen. Use the
keys to view all the lines.
Press the
the Setup Tool menu.
Write this information in the space provided on the inside of the front cover.
Printer Interface
The scan tool is designed as a Data Terminal Equipment (DTE) device with a
DB9M (9-pin D-shape male) connector to interface with a compatible serial
printer.
Compatible Printers
The printer must have a serial RS-232 interface circuit and be compatible with
the Epson FX format. The following printers are recommended:
3 – 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
arrow keys to select
. English is the default.
again to return to the Setup Tool menu.
E N T E R
arrow keys to
U P / D O W N
to save the setting and to
arrow keys and press
U P / D O W N
or
B A C K E N T E R
.
E N T E R
.
.
E N T E R
arrow
key to return to