Table of Contents
Advertisement
Use
Effect-mode (mode switch SW8 in position 'eff')
This mode allows you to select one of the 11 available effects, using the buttons (8) and (9)
Effect #
1
Static colours
2
Sequenced colours
3
Sequenced primary colours
4
Colour fade
5
Flame effect
6
Strobo
7
Random colours
8
Random colours
9
Random flashes
10
Nightlight
11
Traffic light
Effects 2 to 11 feature adjustable speed. Press (11) to increase speed, press (10) to decrease speed
Memory: Once you have selected an effect and the desired speed, you can store it in memory by flipping the mode
switch to 'RGB'. Next time, when you turn on the controller with the slide switch set to 'eff', it will revert to the effect you've
selected
12
Select a static colour by means of buttons (12) and (13).
Colours: Red - Green - Red/Green - Blue - Red/Blue - Green/Blue - Red/Green/Blue
Same as above, but automatically sequenced
Red - Green - Blue sequencer
Fade Red-Green-Blue-Red
3 independent flame simulations
3 outputs blink with 50% duty cycle
Random colours, hard transistions between colours
Random colours, soft transitions between colours
Random colours, fade 0 -> 100% -> 0
All channels 100%, next, slow off all channels, finally Blue remains at 10%
Green, Blue, Red, Green sequence. Use Blue output for yellow light
Description
Advertisement
Table of Contents
