Shark DuoClean IONFlex 2X Quick Start Manual

MULTIFLEX™ REACH
Press the MultiFLEX Lock Release
button to lower the angle of the wand
to increase your reach.
EMPTYING THE DUST CUP
1. To empty dust
cup, first remove
the handvac from
the wand by
pressing the Wand
Release button
and pulling up on
the handvac.
Wand
Release
Wand Release
Button
@sharkcleaning
©2018 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. DUOCLEAN,
MULTIFLEX, IONFLEX, and SMART RESPONSE are trademarks of SharkNinja Operating LLC.
MULTIFLEX STORAGE
Press the MultiFLEX Lock Release
button and hold it down while folding
the handvac forward, until the
unit locks in storage mode.
To vacuum, press the MultiFLEX Lock
Release button while lifting up the
handvac, until the wand locks in place.
MultiFLEX
Lock Release
Carry Handle
2. Position dust cup
over a trash bin,
then open the
bottom of the dust
cup by pressing
the Dust Cup
Release button on
the side.
Dust Cup
Release Button
Please make sure to read the enclosed Shark® Owner's Guide prior to using your vacuum.
CORD-FREE ULTRA-LIGHT
QUICK
START
GUIDE
Use this Quick Start Guide
to start using your new
vacuum's great features.
For questions, contact us
at 800-798-7398 or visit us
online at sharkclean.com
Register your vacuum at
registeryourshark.com
IF251C
IF251C_XXXXXX
2X
IONFLEX
™