To check the channel settings of each cluster :
- Turn the button to select the Filter - Input Selection mode.
- Push the rotary button to enter the selected mode.
- Turn the button to choose the cluster to be checked.
- The display shows the channels which have been set.
Examples :
- Push the button to exit.
The LED is GREEN.
Filter-Input Selection
The LED is now RED colored.
Filter-Input Selection
1
2
3
4
5
6
7
8
9
10
Cluster is parked.
Cluster is set to channel 22.
Blinking 22 and 26:
cluster is set from 22 to 26.
The LED is GREEN.
Filter-Input Selection
8