Johansson 6504 User Manual page 5

CLUSTER PROGRAMMING
Setting clusters / UHF input
- The equalizer has 3 UHF input which are splitted over 10 clusters.
There are three possible configurations :
Input UHF1 UHF2
Number of 2
cluster(s) 2
2
To set the number of cluster(s) per input :
- Turn the button to select Split Input mode.
- Push the button to confirm.
- Turn the button to set one configuration :
- Push the button to confirm.
Notes :
- UHF1 is set for 2 clusters, UHF2 and UHF3 are set for different number of cluster(s).
- Each cluster can be switched off (Park function).
For example if you only need one cluster for UHF1, set the second cluster on channel 00 to switch it off
(see following paragraph "Setting channels / cluster").
UHF3
UHF1 clusters are indicated by the YELLOW LEDs n° 1 and 2.
8 0
UHF2 clusters are indicated by the RED LEDs n° 3, 4, 5, 6, 7, 8, 9 and 10.
7 1
UHF3 clusters are indicated by the GREEN LEDs n° 8, 9 and 10.
5 3
UHF1 cluster indicator
UHF2 cluster indicator
UHF3 cluster indicator
The LED is green.
Split Input
The LED is red.
Split Input
1 2 3 4 5 6 7 8 9 10
The LED is green.
Split Input
5