Johansson 6504 User Manual page 6

Setting channels / cluster
Each cluster has a bandwidth which can be programmed from 1 to 7 channels :
To set the channel(s) per cluster :
In the following example cluster 1 is set for channel 22 to channel 26.
- Turn the button to select the Filter - Input Selection mode.
- Push the rotary button to enter the selected mode.
- Inside the mode, turn the button to select the cluster to be set.
- Push the button to confirm.
- Turn the button to select the Start mode.
- Push the rotary button to enter the selected mode.
- Turn the button to select the start channel
- Push the button to confirm.
- Turn the button to select the Stop mode.
- Push the rotary button to enter the selected mode.
- Turn the button to select the stop channel
- Push the button to confirm.
LED n° 1
Repeat this section to set all clusters
Mode is indicated with
a GREEN colored LED.
Filter-Input Selection
The LED is now RED colored.
Filter-Input Selection
1 2 3 4 5 6 7 8 9 10
The LED is green.
Filter-Input Selection
The LED is green.
Start
The LED is now RED colored.
Start
Display
The LED is green.
Start
Stop
The LED is green.
Stop
The LED is now RED colored.
Display
Stop
The LED is green.
= green LED
= red LED
6