Playing The Tv Programs Or Videos Recorded On A Dvd; Changing The Play Settings For Dvds - Fujitsu LifeBook N Series Manual

• Stop/Eject
When you press the [Stop/Eject] button during
DVD play, play is temporarily stopped. Pressing
the [Stop/Eject] button again causes the tray to
emerge slightly to eject the DVD.
The [Stop/Eject] button on the notebook can be
used instead of the [Stop/Eject] button on the
remote control.
• Adjusting the volume
The volume increases when the (+) button is
pressed, while it decreases when the (-) button
is pressed. Pressing the [Mute] button will
temporarily turn off audio. Pressing it again allows
audio to come out.
The volume adjusting button of the main unit of
the notebook can be used instead of the +/-
buttons. When the upper button is pressed, the
volume increases, while when the lower button
is pressed, it decreases.
Adjust the volume so that the sound from
the speaker is not distorted. Failure to do so
could result in damage to the speaker.
• Changing the screen setting
Adjusting the brightness, colors, and contrast of
the screen, setting an off-timer, and changing
screen types can be performed. See "Adjusting
the display quality" on page 50.
Using the DVD menu
Some discs may have special menus. With such
DVDs, the disc can be operated by reading its
special menu from the menu screen.
Some DVDs may automatically display the title
menu when set, but there may be some cases
which are not operated by the remote controller
even if the title menu is displayed. In this case,
read the title menu from the menu screen by
following the steps below.
1. Press the [Menu] button and select Menu from
the screen.
TV Tuner User's Guide
2. Select "Root menu" or "Title menu" and press
the [Enter] button. The menu screen unique
to the disc is displayed.
Playing the TV programs or videos
recorded on a DVD
Playing TV programs recorded by Instant
MyMedia
DVDs on which TV programs were recorded in
Instant MyMedia, can be played in the DVD/CD
mode in the same way as commercially available
DVDs.
Playing TV programs or videos recorded on
other DVD recorders
DVDs recorded in a DVD video format can be
played.
DVD discs on which digital broadcasts are
recorded cannot be played.

Changing the play settings for DVDs

The status of DVDs to play may be
determined by the intention of software
designers. In that case, functions may not
work as operated, because Instant MyMedia
is played according to the contents of the
disc which the software designer intended.
Refer to the instruction manual for the DVD
to be played.
Changing the region code
Each playable region code is set to each DVD,
so it cannot be played if this code is not matched
with the region code of playing devices.
If you want to play DVDs with different region
codes, the region code of Instant MyMedia can
be changed.
45