4.2.4.1 Printer Mechanism Removal
1. Remove the upper case (Refer to Section 4.2. 1.).
2. Remove the platen knob.
3. Remove the push tractor unit (Refer to Section 4.2.2.).
4. Disconnect connectors CN 12,
MONMA board (Refer to Figure 4-8.)
5. For the
remove the three screws, or for the LQ-105O remove the four screws,
6), which attach the ground plates to base frame.
6. For the
remove the four screws, or for the
22), securing the printer mechanism to the lower case.
15,
16, CN8,
CPS
6)
CTB (0)-(4
22)
Fig. 4-15. Printer Mechanism Removal
4 - 1 5
CN
CN 14, CN 13, and CN 11 from the
050 remove the five screws,
REV.-A
(3 X
(4 X