HTRONIC HTC 4000BT Manual page 21

technicAl sPecificAtions And feAtures
– Operating voltage: 220 240 V / AC (50/60 Hz)
– Charging voltage: 14,3 V / 14, 7 V
– Charging current: 1 A to max. 4A (depending on mode)
– Protection-class housing: IP 65
– Operating conditions: -15° C to + 45° C
– Dimensions (W x H x D): 220 x 89 x 57 mm
– Weight: approx. 770 g
– Applicable battery types:
lead-acid, lead-gel, lead- (AGM), calcium, pure lead,
LiPo and Li-Ion starter batteries
– Battery voltage: 12 V (6 cells lead-acid batteries)
– Battery capacity (recommended): 1.2 Ah to 60 Ah
for your sAfety
Please read this manual carefully. It contains important information for the safe
operation and use of this device. The law requires that we give you important
information for your safety and that we point out how to avoid damage to persons,
the device and connected devices. No liabilities will be taken for damages or
claims resulting out of not reading and/or not following the user guide and/or
any form of modification on or in the product. Under these circumstances, no
warranty services will be given. These instructions are part of the device and
should therefore be stored carefully. In order to avoid malfunction, damage and
health problems, please follow the safety instructions carefully:
Repairs may only be carried out by an expert. Dispose of the packaging material
and keep it out of reach of children. There is a danger of suffocation. Electrical
devices do not belong in the hands of children. Store the device in a safe place.
dAnger! This unit may only be opened or repaired by a person
authorized and qualified to do so and/or who has the knowledge of
electrical safety regulations. If the device is opened there is a risk of
electric shock. Disconnect the device from the mains before opening the device.
Automatic Charger HTC 4000BT | 21