Standard Horizon HX370S Owner's Manual page 31

5.18.5 LP ( L
AMP
Function: Select the LCD/Keypad Lamp mode.
Available Values: KEY/Cnt (Continue)/OFF
Default: KEY
KEY:
Cnt (Continue): Illuminates the LCD/Keypad continuously.
oFF:
Key
5.18.6 SnL ( S
CAN
Function: Enable/Disable the Scan lamp while scanning is paused.
Available Values: ON/OFF
Default: ON
5.18.7 SCn ( S
CAN
Function: Select the display mode while scanning.
Available Values: nor (Normal)/SPL (Special)
Default: nor (Normal)
nor (Normal): The channel number changes when scanning.
SPL (Special): The channel number only changes when the radio receives
a transmission. This lets you see the last channel on which
someone called.
5.18.8 SCr ( V
OICE
Function: Enable/Disable the Voice Scrambler.
Available Values: OFF/SC0/SC1/SC2/SC3
Default: OFF
Off
HX370S
)
M
ODE
Illuminates the LCD/Keypad for 5 seconds when any key is
pressed.
Disables the LCD/Keypad illumination.
)
L
AMP
)
D
ISPLAY
Normal
) [ Requires optional FVP-31 ]
S
CRAMBLER
Code "SC1"
Continue
Special
Code "SC2"
Off
Code "SC3"
Page 29