Auto Capture Setting; Record To Tf/Sd; Email - SafeHome M Series Manual

- UK -

Auto Capture Setting

The SafeHome M-series can be set to automatic photos at predefined periods. Tick in (1)
to save the pictures on the microSD card if available and tick (2) to save the pictures on
an FTP account if available. For both selections, the time interval between each picture
can be set.
The scheduler is used for planning the periods during which, the photographing should
be active.
Click Apply to save settings.

Record to TF/SD

This menu is used on SafeHome M-serie cameras with microSD card. When the feature is
activated by marking ON (1), the camera will automatically – during the periods selected
in the scheduler – record videosequences of lenght set in (2) and quality selected in (3).
Click Apply to save settings.
12
www.safehome.dk
HD P2P Camera HD P2P Camera

Email

If email alarm has been enabled in the Alarm menu, the email settings should be set.
(1) SMTP Server name: Fill out the details of the mailserver used as emailservice for
sending the email from the camera to the receivers. Consult your internet supplier's
webpage for details hereof or contact their customer support.
(2) Server Port: Fill out the portnumber used by your internet supplier's mail server.
Consult your internet supplier's webpage for details hereof or contact their customer
support.
(3) Authentication: Tick the checkbox if the mailserver requires username/password in
order to use the mail service. Consult your email supplier's webpage for details hereof
or contact their customer support.
Input the mailserver username in the textbox User Name and the password in the
textbox Password.
(4) Send to: Fill out the email addresses of the receivers of email notifications upon mo-
tion detection.
(5) Sender: Fill in the email address, which will be used as sender of the email.
(6) Subject: Input the email subject for all alarm emails.
(7) Message: Input the email message for all alarm emails.
Click Apply and then Test. A test window will display Success and the receivers will
receive a test email if settings are filled out correctly.
Note that many spamfilters and mailservers will delete the mails if sender and receiver
are identical. If mails are not received, it is recommended to change the email address of
either Send To or Sender.
(Actual settings for Gmail is shown in the example.)
www.safehome.dk
- UK -
13