Steps Before Washing - Midea MWMTL075ZOF Owner's Manual

Installation
Connection of inlet pipe, tap and washing machine
Loosen clamp nut
thread
Press slide bushing insert inlet
Tighten Clamp
pipe into, connecting base
Ater connection & installation,
check if there is water leakage
Note: Make sure that the installation is done by CMI trained installation
engineers only. Please call Midea Service Centre for any enquiry.
14
Loosen 4 bolts Set connecting base on tap
thread & tighten bolts evenly
Connection Finished
Installing the Rat Protection Cover
1 Lay down the washing machine
on a soft fabric or cushion.
Front
2 Insert the anti rat protection
cover to be firmly fixed from the
back or front of washing machine
Soft Fabrics
& fix it with screw.

Steps before Washing

Adjust the adjustable foot to make the washing
machine stable.
Adjustable foot (extends when
clockwise rotating & shorten
when counterclockwise rotating)
(Slightly incline the washing
machine first & loosen the adjustable
foot knob. Adjust the adjustable foot
so as to ensure four corners of washing machine
be steadily in contact with the ground. Then
tighten the adjustable foot knob and lock it. If
the ground is not flat, correction
should be made on the ground surface, otherwise the
washer tub will incline and knock the cabinet)
Install the water Inlet pipe.
Before washing, please do take out coins, keys and other pointed objects from the pockets and zip up
clothes tightly to prevent them and wash tub from damage.
Connect with power source.
Turn on the water supply.
Put down the drain pipe.
Put in clothes and suitable amount of
washing powder.
15