Installation - Midea MWMTL075ZOF Owner's Manual

Please do not place burning
Please insert the power
candle, mosquito-repellent,
plug tightly.
incense, cigarette & other
flammable things, e lectric stove,
air heating fan & other heating
sources on the lid of
washing machine.
Please ensure that the water
The water temperature
inlet pipe is connected and shall not exceed 50 C,
the tap is opened before
when washing with
washing clothes. warm water.
Please do not pull the electric
cord while taking out the
power plug.
12
Please don't pull out or
Please use correct power
insert the plug with wet
source.
hands to avoid electric
shock.
Users are not adviced to
o change the plug on their own.
If required please contact
Midea Service Centre.
Please do not wash raincoat,
fishing coat & water proof
clothes in the washing
machine.

Installation

1. Remove package 1. Remove package
• Remove package and take out
the bottom board of the cabinet
on the foam cover.
• Open the lid of washer's door
and take out the accessories.
• A trial operation or washing on the
foamed cushion is strictly forbidden.
2. Installation of drain pipe
• Completely sleeve the drain pipe over the outlet.
• Fix and tighten it with a spring clamper that comes
with the washing machine. (As shown in the figure)
3. Placement of water drain pipe
If the water drain pipe needs to be extended,
its length shall not exceed 3 meters,
otherwise it will affect the water discharging time.
The placed height of water drain pipe
shall not exceed 15cm.
Do not bend the water drain pipe and
place it under the base of washing machine.
Note : Make sure that the installation is done by CMI trained installation
engineers only. Please call Midea Service Centre for any enquiry.
13