Technical Specifications - Midea MWMTL075ZOF Owner's Manual

Troubleshooting
When the washing machine is in trouble, please contact local service o ce or the sales service department of our company
and the customer should not dismantle the machine without permission.
If the washing machine can not work normally, and the abnormal indication is shown in the user interface, please check and
correct as follows:
Fault Cause of fault
Water injection for about
Alarm for
16 minutes, but do not
water inlet
reach preset water level
Open the lid when the
Alarm for
washer is spinning.
opening lid
Imbalance Checked imbalance for the
alarm third time.
After draining for 4
minutes, does not finish
Drain alarm
draining.
22
Alarm of the
Indication Stopping Alarm
buzzing sound
The lights of
The buzzer goes Open the lid
standard, deep
on buzzing for 6
to deal with
clean and soak will
seconds. If the
faults, then
flare.
fault is not solved,
close the lid to
buzzes again for
stop the
6 seconds in
The lights of fast
clean, delicate and every 16 minutes.
alarm.
wash will flare.
The lights of heavy
load, active and
rinse will flare.
The lights of tub
clean, air dry and
spin will flare.
Technical Specifications
Model MWMTL065ZOF
Rated power supply 220-240 v - 50 Hz
Input power of motor 400W
Rated washing capacity 6.5 Kg
Rated spin capacity 6.5 Kg
Overall dimensions
515x525x900(mm)
(W x D x H)mm
*Applicable water pressure 0.1 MPa - 0.6 MPa
Weight 29 Kg
Note : *Tested in laboratory conditions.
MWMTL075ZOF
220-240 v - 50 Hz
450W
7.5 Kg
7.5 Kg
550x564x910(mm)
0.1 MPa - 0.6 MPa
30Kg
23