Oven Door - GE JRP20 Owner's Manual

Oven Door

How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective shipping film
with your fingers and slowly peel it from the appliance
Remove all of the film before using the appliance for the
first time.
Lift the door straight up and
off the hinges.
The gasket is designed with a gap
at the bottom to allow for proper air
circulation.
Do not rub or clean the door
gasket
resistance to abrasion.
worn, frayed or damaged in any way
or if it has become displaced on the
door, you should have it replaced.
high sugar or acid content (such
as tomatoes, sauerkraut, fruit
juices or pie filling) to remain on
the surface. They may cause a
dull spot even after cleaning.
16
Lift-Off Oven Door
The oven door is removable for easier
access to the light bulb.
To remove the door, open it to the broil
stop position. Grasp firmly on each side
and lift the door straight up and off the
hinges.
Door (on the upper oven and/or self clean model)
To clean the inside of the door:
cleaned during the self-clean cycle, you
do not need to clean this by hand.
the door liner can be cleaned with a
soap-filled or plastic scouring pad, hot
water and detergent. Rinse well with a
vinegar and water solution.
To clean the outside of the door:
the top, sides and front of the oven door.
Rinse well. You may also use a glass
cleaner to clean the glass on the outside
Lift-Off Oven Door
To clean the inside of the door:
cleaned during the self-clean cycle, you
do not need to clean this by hand.
the door liner can be cleaned with a
soap-filled or plastic scouring pad, hot
water and detergent. Rinse well with a
vinegar and water solution.
To clean the outside of the door:
the top, sides and front of the oven door.
Rinse well. You may also use a glass
cleaner to clean the glass on the outside
To assure no damage is done to the finish of the
product, the safest way to remove the adhesive from
packaging tape on new appliances is an application of
a household liquid dishwashing detergent. Apply with a
soft cloth and allow to soak.
NOTE:
cannot be removed if it is baked on.
and the oven door frame.
To replace the door, make sure the
hinges are in the broil stop position.
Position the slots in the bottom of the door
squarely over the hinges and slowly lower
it over both hinges.
vent openings.
persistent, use a soft abrasive cleaner
and a sponge-scrubber for best results.
tomato sauces and basting materials
containing acids may cause
discoloration and should be wiped up
immediately. When surface is cool,
clean and rinse.
powders or harsh abrasives on the
outside of the door.
vent openings.
persistent, use a soft abrasive cleaner
and a sponge-scrubber for best results.
tomato sauces and basting materials
containing acids may cause
discoloration and should be wiped up
immediately. When surface is cool,
clean and rinse.
powders or harsh abrasives on the
outside of the door.
49-80715 Rev. 1