Installing Batteries in the Remote Control
1
Lift the cover at the back of the remote control upward as shown in the figure.
2
Install two AAA size batteries.
➢
Make sure to match the "+" and "–" ends of the batteries with the diagram
inside the compartment.
3
Close the cover as shown in the figure.
➢
Remove the batteries and store them in a cool, dry place if you won't be using
the remote control for a long time. The remote control can be used up to
about 23 feet from the TV. (Assuming typical TV usage, the batteries last for
about one year.)
➢
If the remote control doesn't work! Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
Switching Your Television On and Off
The main lead is attached to the rear of the television.
1
Plug the main lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2
Press the
(Power) button (On/Off) on the front of the television or press the POWER ( ) button on the remote
control to switch the television on. The programme that you were watching last is re-selected automatically. If you
have not yet stored any channels, no clear picture appears. Refer to "Storing Channels Automatically" on page
11 or "Storing Channels Manually" on page 12.
➢
If the television is initially powered on, several basic customer settings proceed automatically.
Refer to "Plug & Play Feature" on page 10.
3
To switch the television off, press the
POWER ( ) button on the remote control.
4
To switch the TV on, press the
or number buttons on the remote control.
Viewing the Menus
1
Press the MENU (
The main menu is displayed on the screen.
Its left side has five icons: Input, Picture, Sound, Channel, and Setup.
Press the ... or † button to select one of the icons.
2
Press the ENTER/OK (
Press the ... or † button to move to items in the menu.
3
Press the ENTER/OK (
Press the .../†/œ/√ button to change the selected items.
4
Press the MENU (
5
Press the EXIT button to exit from the menu.
(Power) button (On/Off) on the front of the television or press the
(Power) button (On/Off) on the front of the TV or press the POWER ( ) button
) button.
) button to access the icon's sub-menu.
) button to enter items in the menu.
) button to return to the previous menu.
English - 9
TV
Input
Source List
: TV
Edit Name
Move
Enter
Exit