Freezing The Current Picture; Plug & Play Feature - Samsung Plasma Display Panel Television Owner's Instructions Manual

Freezing the Current Picture

Plug & Play Feature
Plug & Play
Start Plug & Play
OK
Enter Exit
TV
Setup
Plug & Play
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
More
Move Enter
You can freeze the picture when watching a television programme simply by
pressing the STILL button. To return to normal viewing, press it again.
➢
To prevent screen burn-in, this function will automatically cancel after
5 minutes.
When the television is initially powered on, several basic customer settings proceed
automatically and subsequently.
The following settings are available.
1 If the television is in standby mode, press the POWER ( ) button
on the remote control. The message to start Plug & Play is displayed.
2 The Language menu will automatically appear after several seconds.
Select the appropriate language by pressing the ... or † button.
3
Press the ENTER/OK (
status of the antenna is displayed.
4 Make sure that the antenna is connected to the TV.
Press the ENTER/OK (
Select your country or area by pressing the ... or † button.
5
Press the ENTER/OK (
displayed.
6 To start channel store, press the ENTER/OK (
The search will end automatically. The TV will begin memorizing all of the
available channels.
Press the ENTER/OK (
Press the œ or √ button to select the hour or minute.
7
Set these by pressing the ... or † button.
➢
You can enter the Hour, Minute by using the numeric buttons on the
remote control.
8 Press the ENTER/OK (
The DTV channel scan menu appears and the DTV channel is automatically
updated.
➢
If the DTV channel is updated, the Source in the source list of the Input
menu is automatically changed to DTV.
➢
For detailed descriptions about DTV channel update, refer to page 28 of
this manual.
If you want to reset this feature ...
1 Press the MENU (
Press the ... or † button to select Setup, then press the ENTER/OK (
2
button.
3 Press the ENTER/OK (
Return
The message to start Plug & Play is displayed.
English - 10
) button. The message to check the connected
) button. The Country menu is displayed.
) button. The menu to select channels is
) button to set the clock.
) button to confirm your setting.
) button to display the menu.
) button again to select Plug & Play.
) button.
)