Subscribe to Our Youtube Channel
Related Manuals for Parker P1Z Series
Summary of Contents for Parker P1Z Series
- Page 1 Rodless, magnetically coupled pneumatic cylinders Operating instructions - English P1Z series...
-
Page 2: Table Of Contents
• The regulations contained in these operating instructions. We reserve the right to make technical modifications. Copyright Parker Hannifin GmbH retains copyright title to these operating instructions. Copyright 2010 Neither all nor part of these operating instructions may be duplicated, distributed or used for competition purposes without authorization, nor may they be made available to others. -
Page 3: Safety
P1Z series Safety The operational safety of the P1Z is only guaranteed if it used for the intended purpose. It is only assured if the P1Z is used: • to move loads, • to exert force. The P1Z is operated with compressed air (other media on request). The following must also be taken into consideration: • all of the conditions specified in the order confirmation, these operating... -
Page 4: Description Of The P1Z
Rodless, magnetically coupled pneumatic cylinders The identification plate You will find this identification plate on the carriage of the P1Z: Calendar week Calendar year Manufacturing order no. Customer‘s order no. Stroke length Model designation (Product key code) Diameter Variant key Operating pressure (see catalog) range... -
Page 5: Function
P1Z series Function • Alternating ventilation of the compressed air ports moves the piston back and forth in the barrel. • Magnetic coupling transmits the force of the piston to the carriage. • Loads are attached directly to the carriage /guide carriage. -
Page 6: Installation
Rodless, magnetically coupled pneumatic cylinders Installation (Basic model and model with parallel rod guidance) 4.2.1 Mechanical • Make sure the payload is only fastened to the provided fixing points. • Position the payload in such a way that the forces and tilting moments on the piston are below the limits specified in the P1Z catalog. -
Page 7: Shock Absorbers
P1Z series End position limiting Basic model: An adjustable damping screw is used to cushion the end position on both sides. With parallel rod guidance: The cylinder with parallel rod guidance can be operated either with elastomer dampers or hydraulic shock absorbers. -
Page 8: Commissioning
Rodless, magnetically coupled pneumatic cylinders Commissioning All assembly and commissioning works must be performed by trained personnel! Caution! Strong magnetic field! There can be no guarantee that this field will not influence sensitive equipment in the vicinity, e.g., measuring equipment. If the holding force between the two magnet stacks on the piston and carriage is exceeded, the two may separate. -
Page 9: Maintenance / Service
P1Z series Maintenance / Service Caution Maintenance and repair works may only be performed by trained or instructed personnel! Risk of crushing Maintenance works may only be performed once the machine has been switched off and the compressed air system has been vented. -
Page 10: Repairs
Uneven movement of check valve. the carriage. Soiled cylinder barrel. Clean, lubricate, use cover. Damaged cylinder barrel. Contact Parker. End cushioning damping Loosen the damping screw screw tightened to the full. slightly. Press the carriage firmly Carriage does not travel against the repulsion force into to end position. -
Page 11: Dismantling From The System
P1Z series 6. Test: Push the cylinder (and – with it – the piston) first to one end position of the cylinder and then to the other. In both cases, the distance from the center of the carriage to the respective end plate must be the same. - Page 12 Tel: +36 1 220 4155 parker.southafrica@parker.com parker.hungary@parker.com P-A7P020GB 10/2013 © 2013 Parker Hannifin Manufacturing GmbH & Co. KG- All rights reserved. Parker Hannifin Manufacturing Germany GmbH & Co. KG Pneumatic Division Europe – Origa Industriestraße 8 70794 Filderstadt, Germany Tel: +49 (0)7158 1703-0 Fax: +49 (0)7158 64870 E-Mail: info-origa-de@parker.com...
Need help?
Do you have a question about the P1Z Series and is the answer not in the manual?
Questions and answers