Realización De La Instalación: Cara Limpia Y Montaje Empotrado - Empire Comfort Systems Boulevard VFLL60FP90LP-1 Manual

COMPLETING INSTALLATION - CLEAN FACE & FLUSH MOUNT
1. Replace LED reflector.
2. Retrieve shorter glass and install in front of burner.
3. If installing an optional liner, install them now. Refer to the
instructions provided with the liner kit.
4. Install the burner screens as shown in Figure 49. If installing
an optional log set, refer to the log set instruction manual for
placing the log pins into the burner screens.
Notice: The flange on the bottom of the front and rear burner
screens must be toward the rear of the fireplace. (See Figure 50)
FRONT GLASS
SCREEN
5. If installing an optional log set, install it now. Refer to the
installation instructions provided with the log set for proper
placement.
6. Place decorative glass on the screens around the burner
opening. (Refer to page 33)
Page 30
Figure 49
BOTTOM FLANGE
TO BACK OF
FIREPLACE
Figure 50
7. Install optional decorative surround panel assembly.
Refer to instructions included with the surround panel kit.
8. If installing an optional inner top deflector, loosen the five
(5) Phillips head screws securing the inner firebox top. Slide
the inner top deflector, slotted side first, between the inner
firebox top and the fireplace opening until the front angle is
flush with the opening. The angle on the front of the inner top
deflector should point downward. Tighten the five (5) Phillips
head screws to lock in place.
9 Retrieve larger glass and install in slots on the left and right
of fireplace. (Refer to page 34)
10. Test fireplace using remote and show owner how to use the
remote. Show owner lighting instructions in this manual.
11. Installation of fireplace is complete. Leave this manual with
the owner.
Figure 51
36776-4-0117