Bosch CCS180 Operating/Safety Instructions Manual page 11

2610052972.qxp_CCS180 8/6/19 12:50 PM Page 11
and mount it against the INNER
WASHER on the shaft. Be sure the
large diameter of the OUTER washer
lays flush against the blade.
5. Reinstall OUTER WASHER and tighten
BLADE STUD finger tight. The face of
upper guard has marks around it that
will help you properly adjust the
blade stud. Press lock button to lock
shaft and TIGHTEN BLADE STUD
COUNTER-CLOCKWISE TWO MARKS
ON UPPER GUARD WITH THE
WRENCH PROVIDED.
Do not use wrenches with longer
handles, since it may lead to over
tightening of the blade stud.
▼
VARI-TORQUE CLUTCH
This clutching action is provided by the
friction of the OUTER WASHER against
the BLADE and permits the blade shaft
to turn when the blade encounters
excessive resistance. When the BLADE
STUD is properly tightened (as
described in No. 5 of Attaching The
Blade), the blade will slip when it
encounters ex cessive resistance, thus
reducing saw's tendency to KICKBACK.
One setting may not be sufficient for
cutting all materials. If ex cessive blade
slippage occurs, tighten the blade stud
one mark more. OVERTIGHTENING THE
BLADE STUD
EFFECTIVENESS OF THE CLUTCH.
Fig. 3
Assembly
NULLIFIES THE
BOSCH VH-SERIES
Vx120
SCREW
-11-
▶ Dust Extraction
position dust port adapter and vacuum
hose so that it does not interfere with
the lower guard, or the cutting
operation at all settings.
▼ DUST PORT ADAPTER
(Sold separately)
Attach the dust port adapter to the foot
of the tool with screw as shown in
Fig. 3.
▼ CONNECTION TO VACUUM
CLEANER / DUST ExTRACTOR
Connect the vacuum cleaner hose to the
dust port adapter (Fig. 3).
- Bosch VH-series hoses - The VX120
hose adapter is required (included
with VH-series hoses).
- Other 35mm and 22mm hoses, such
as the Bosch VAC-series hoses -
Connect hose directly to the tool.
- Common 1/4" or 1½" hoses - The
Bosch VAC024 adapter is required
(included).
Connect the vacuum hose to a vacuum
cleaner.
The vacuum cleaner must be suitable
for the material being worked on.
When vacuuming dry dust that is
especially detrimental to health or
carcinogenic, use a special vacuum
cleaner / dust extractor.
HOSE
35mm HOSE
VAC024
DUST PORT
ADAPTER
To reduce the risk of
injury, always
1-1/4" or
1-1/2" HOSE