Telephone Operation; Making And Receiving A Call; Changing The Channel; Using Redial - Radio Shack SP-515 Owner's Manual

900 mhz digital cordless telephone

Hide thumbs

Table Of Contents

Table of Contents

n Telephone Operation

MAKING AND RECEIVING A CALL

To make a call, lift the handset and press

cator lights steadily and you hear the dial tone, dial a phone number or

memory number (see "Memory Dialing" on Page 13).

To answer a call if the handset is on the base, simply lift the handset and begin your conversation. Or, if the

handset is away from the base, press

cator on the base light.

Note: If

To end a call, place the handset on the base or press

Notes:

If you press

again, or place the handset on the base.

PHONE

If you want to make a call but the handset is out of the base's range, the handset beeps twice. Move the

handset closer to the base and try again.

SETTING THE HANDSET'S VOLUME

You can select any of three volume levels by repeatedly pressing

during a call. Three short beeps sound when the handset is at the

UME

highest setting. If you press VOLUME again, the handset returns to the

lowest setting.

CHANGING THE CHANNEL

The SP-515 scans 25 channels (frequency pairs used between the base and the handset) and automatically

selects a clear channel each time you make or receive a call.

If you hear other conversations or excessive noise during a call, press

CHANNEL

Note: If the handset is too far from the base, the channel might not change. Move closer to the base and try

again.

USING REDIAL

You can quickly redial the last number dialed. Simply lift the handset and

press

PHONE

is set to

, you must press

RINGER

OFF

to hang up and the phone does not disconnect, move closer to the base then press

PHONE

on the handset to select a different channel.

. When you hear the dial tone, press

. When the PHONE indi-

PHONE

first. The PHONE indicator on the handset and the IN USE indi-

PHONE

to answer a call.

PHONE

The indicator turns off.

PHONE

REDIAL