Using Voice-Activated Dialing - Sprint PCS PM-225 Phone Manual

Using Voice-Activated Dialing

In addition to Sprint PCS Voice Command
can use a voice dial tag to automatically dial a phone number
in your Contacts. (A voice dial tag is a command you record and
use to place calls without using the keypad.) Your phone can
store up to 30 voice dial tags.
Programming Voice Dial Tags
To program a voice dial tag:
1.
Press Menu (left softkey) to access the main menu.
2.
Select Voice Services (
3.
Scroll to Voice Dials and press
4.
Scroll to <Record New> and press
5.
Enter or highlight the entry (name) in the Contacts and
press
Tip:
If an entry has more than one number, press the navigation key right
or left to select the desired number, then press OK .
6.
After you are prompted to say the name you wish to
program, wait for the beep and then say the name into
your phone's microphone.
7.
Respond to the prompt by repeating the name after the
beep.
114
.
OK
Section 2I: Using Your Phone's Voice Services
(see page 183), you
SM
).
7
.
OK
OK
.