Table of Contents
Advertisement
Changing the Lock Code
Avoid using codes similar to emergency numbers such as
911 to prevent accidental dialing of the emergency
number.
Tip:
If you can't recall your lock code, try using the last four
digits of your Sprint PCS Phone number, or try 1234, or 0000.
If none of these work, call Sprint Customer Service at
1-888-211-4PCS (4727).
If you enter an incorrect lock code, your device will
prompt you for the lock code. If you enter the wrong lock
code 5 times in succession, you will not be able to enter a
code for 5 minutes, even if you power off the device
between incorrect entries.
1.
From standby mode, select Menu > Settings > Security.
2.
Enter the lock code and select OK.
3.
Select Change lock code.
4.
Enter the new lock code (must be 4 characters in
length), re-enter the new lock code for verification,
and select OK.
When you change your lock code, make sure you store it in
a safe place, away from your device. Avoid entering access
codes similar to emergency numbers to prevent accidental
emergency calls.
Section 2C: Setting Your Phone's Security
63
Advertisement
Table of Contents
