Dialing From The Contacts List; Using Speed Dialing - Sanyo Cell Phone User Manual

Dialing From the Contacts List

To dial directly from a Contacts entry:
1.
Select
Shortcut:
From standby mode, press Contacts (right softkey) to list entries.
2.
Highlight the entry you want to call and press
– or –
To dial another number from the entry, highlight the
name and press
call, and press
Tip:
You can also place a call by pressing Options (right softkey) > Call or
Call:Speaker On .
Note:
The icons next to each entry represent the Contacts labels (for
example, Mobile, Home, Work, etc.). A triangle next to an icon means there is
another label for the entry. Press the navigation key right or left from the
Contacts list to select the desired label.

Using Speed Dialing

With this feature, you can dial your favorite entries using one
keypress for locations 2–9. (See "Assigning Speed Dial
Numbers"on page 112.)
To use speed dial for voice calls:
From standby mode, press and hold the appropriate key
for approximately two seconds.
– or –
From standby mode, press the appropriate key and press
42 Section 2A: Your Phone – The Basics
> Contacts > Find/Add Entry.
to dial the entry's default phone number.
or .
, highlight the number you wish to
or .
or