Assembling The Burner - Miele ProLine CS 1018 Operating And Installation Instructions

Assembling the burner

 Place the burner head  onto the
burner base  so that the flame
failure monitor  and the ignitor 
extend through their respective holes
in the burner head.
The lobe  on the burner cap must
fit into the recess  on the burner
head. The lobe  on the burner head
must fit into the recess  on the
burner base.
 Replace the burner ring .
 Then place the burner caps  and 
in position.
Cleaning and care

Burners cannot function
correctly if they are incorrectly
assembled. This can lead to damage
to the appliance and injury.
Ensure that all parts of the burner are
reassembled in the correct order.
 Ignite all burners to check that they
are operating correctly.
– The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
– On the highest setting, the flame
must have a distinctive and visible
core.
31