Miele ProLine CS 1018 Operating And Installation Instructions page 50

Gas wok burner
Hide thumbs Also See for ProLine CS 1018:
Table of Contents

Advertisement

Electrical connection
The voltage and rated load are given on
the data plate. Please ensure these
match the household mains supply.
Residual current device
For extra safety, it is advisable to
protect the ProLine appliance with a
suitable residual current device (RCD)
with a trip range of 30 mA.
WARNING
THIS APPLIANCE MUST BE
EARTHED
Replacing the mains
connection cable
Risk of electric shock!
Incorrect connection to the electricity
supply may result in an electric
shock.
The mains connection cable must
only be replaced by a suitably
qualified and competent electrician
in accordance with current local and
national safety regulations.
If the mains cable needs to be replaced,
it must be replaced with a special
connection cable, type H 05 VV-F (PVC
insulated), available from Miele, by a
Miele authorised service technician or
suitably qualified and competent
electrician in order to avoid a hazard.
The connection data is given on the
data plate.
50

Advertisement

Table of Contents
loading

Table of Contents