Table of Contents
Advertisement
Installation
Granite and marble worktops
You will need heavy-duty double-
sided tape (not supplied) to secure the
spring clamps and spacer bars.
Attach the adhesive tape along the
top edge of the cut-out in the
positions shown in the illustrations.
Position the spring clamps and
spacer bars on the top edge of the
cut-out and press them firmly into
place.
46
Apply silicone adhesive to the side
edges and bottom edge of the spring
clamps and spacer bars .
Then fill the gap between the
spacer bars and the worktop with
silicone.
Advertisement
Table of Contents
