Creating A New Program Password; Changing The Program Password; Demo Mode - Monacor IT-400DT Instruction Manual

6.2.2 Creating a new program password

To create a password protection for starting the program:
1) Call up the menu item "Tools Set Software Password" .
2) Enter the desired password in the field "Enter New Password:" of
the window displayed .
3) Another window will appear: To confirm, enter the password once
again in the field "Confirm New Password:" and make sure to
remember it!

6.2.3 Changing the program password

To change the password for starting the program:
1) Call up the menu item "Tools Change Software Password" .
2) Enter the current password in the field "Enter Old Password:" of
the window displayed .
3) Another window will appear: Enter the new password in the field
"Enter New Password:" .
4) Another window will appear: To confirm, enter the password once
again in the field "Confirm New Password:" and make sure to
remember it!

6.2.4 Demo mode

If no unit is connected to the computer, it is possible to create a virtual
unit for demonstration purposes . For this purpose, call up the menu
item "Tools Enter Demo Mode" .
A list will appear, showing various virtual units with the addition
"DEMO..." . Just like for real units, the button
☞
the configuration menu (
To delete the virtual units from the list, call up the menu item
"Tools Leave Demo Mode" .
is used to call up
fig . 8) .
43