Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Digitrax UT1
Summary of Contents for Digitrax UT1
-
Page 2: Table Of Contents
UT1 Traditional Style Throttle Manual Table of Contents 1.0 UT1 Utility Throttle Features and Specifications 2.0 Using your UT1 2.1 Turning On Track Power 2.2 Turning Off Track Power 2.3 Running a Locomotive 2.3.1 Run An Analog Locomotive on Address "00"... -
Page 3: Ut1 Utility Throttle Features And Specifications
Plug the UT1 into any LocoNet jack on your LocoNet system Digitrax, LocoNet and others included in this manual are trademarks When the UT1 is first connected to LocoNet all the LEDs in its display of Digitrax, Inc will blink on and then off again. This means that the throttle is working and is communicating as it should. -
Page 4: Turning Off Track Power
2. Select the two digit address "00" of the analog locomotive you want to the same direction as the locomotive you are trying to select. to run using the rotary dial selectors on the UT1. The left rotary dial Reverse the direction toggle switch and the "STATUS" LED will selects the "tens"... -
Page 5: Ut1 Throttle Control Panel
· If address selector is set to other than "99" press ACQ/DISP and The UT1 is color coded according to how the keys are used. SHIFT to dispatch the locomotive address to another throttle in the The only RED key is Run/Stop. This is so you can't miss it in case of system. -
Page 6: F1/F4/On Key
(See Table I). the Command Station will purge these in-use locomotives to the 3. Press and hold the F0 key while you plug the UT1 into the LocoNet common state so that other throttles can access these locomotives. If... -
Page 7: Stop Mode
Turnout Control is already being controlled by another throttle in the system and is The UT1 can be used to throw turnouts on your layout if they are con- not available. nected to a stationary decoder such as a Digitrax DS54. -
Page 8: Running Trains
The right selector dials in the 10s and the left selector dials tive. Care should be taken to insure that the UT1 is at a compa- in the 1s. Select address "99" to select a locomotive or consist that rable speed setting and direction before selecting a locomotive has been "DISPATCHED"... -
Page 9: Dispatching Locomotives
An example would be having a Superintendent of motive power making all the locomotive assignments. This also allows the UT1 to run 4 digit addresses and consists made up on other throttles in the system. -
Page 10: Controlling Lights & Functions
5.6 Controlling Lights & Functions 6.0 Troubleshooting The UT1 has 3 function buttons. Each of these buttons controls 2 func- tions. F0 thru F2 are controlled by just pressing the appropriate but- 6.1 Clean Track ton. The function will toggle on and off each time a button is The majority of intermittent operation faults can be traced to bad connec- pressed. - Page 11 Digitrax gives a one year guarantee against manufacturing defects on Emergency Stop 17 UT1 throttles. These units are not user serviceable (opening the case voids your warranty). If a defect occurs, return the unit to us for service. We will repair or...
Need help?
Do you have a question about the UT1 and is the answer not in the manual?
Questions and answers