Osd-Menu-Function - Siemens SCD 1297-E Operating Instructions Manual

3.2.2.1

OSD-Menu-Function

Main menu Function
Picture 1 Brightness
Contrast
H Position
V-Position
Phase
Frequency
advanced Sharpness
Gamma
Color temperature
Option 1 OSD
OSD H-Position
OSD V-Position
OSD timeout
OSD background
Backlight
Noise suppression
LCD-Monitor SCD 1297
Adjust function / value / range
setting range:
0 to 100 through key (+/-)
setting range:
0 to 100 through key (+/-)
setting range:
0 to 100 through key (+/-)
setting range :
0 to 100 through key (+/-)
setting range :
0 to 31 through key (+/-)
setting range :
950 to 1050 (dependent to picture)
through key (+/-)
1, 2, 3, 4, 5
Linear or CRT
5000 -7300 – 9300 - VAR
select between nine defined OSD positions f
setting range :
0 to 100 through key (+/-)
setting range :
0 to 100 through key (+/-)
5 ... 60 seconds
Opaque – Transparent
setting range :
0 to 100 through key (+/-)
ON - OFF
Page 40 / 44
Description
adjust brightness
adjust contrast
change contrast between dark and light colors
move picture in horizontal direction
move picture in vertical direction
adjust phase of input signal
adjust frequency of input signal
adjust sharpness of the picture by using no. 1 to 5
1=sharp, 5= soft
correction of gamma curve
value of colors will be forwarded to the display
color temperature / adjust color
three defined and one adjustable color temperatures are for
selection
Activate „VAR" - for RGB shows up an adjustment beam.
0 to 100 % (50% correspond to factor 1)
define position OSD
move OSD-menu in horizontal position
move OSD-menu in vertical position
adjust time after the OSD menu is automatically fade out
the adjustment ensures between 5 to 60 s in steps of5 s.
Select background color of the OSD menu
you have the choice between transparent and colored
background.
Adjust brightness ob backlight display
herewith you can match the brightness of the picture with the
brightness of the room.
Standard adjustment OFF.
By ON: Activate the function noise suppression. This function
suppresses interference at the sync signal lines to avoid
A new auto adjustment during short interference.
Operating Instructions
DOC-No.: B30141DE3.DOC