Connecting External Data Media - Beko B24L 5845 4B User Manual

USB MODE

Connecting external data media

It is advised to put the television on stand-by
mode before connecting the External Data me-
dium. Connect the device and then switch the
television on again.
Before disconnecting the data medium, the
television must first be switched to standby, oth-
erwise files can be damaged.
Note:
If you are using a power cable for the
7
external hard disk that you have connected
to the »USB« interface, then the power
cable of the external hard disk must also be
unplugged when the TV is turned off.
You must not disconnect the USB Device
7
from the TV while a file on the USB Device
is being read by the TV.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
USB transfer is not an operating mode in
7
itself. It is only an additional function.
30 / 58 TR
--------------------------------------------------------------------------------------------------------------
1 Connect the »USB« interface of the televi-
sion and the corresponding socket on the
data device (external hard disk, digital
camera, card reader or MP3 player) using
a USB cable.
or
plug the memory stick into the »USB« USB
interface of the television.
Television / User Manual